CryoZero™ ZXO-CP Series: Field-Proven Across Extreme Environments
How one horizontal pump platform delivers zero-failure performance in H2S gas processing, mobile deployment, and sub-zero LNG terminals.
- Platform
- ZXO-CPHorizontal, direct-coupled
- Environments
- ThreeSour gas · mobile · LNG
- Service Temp
- −260°F−162°C
- Area Rating
- ATEX / CSAHazardous zones
The Challenge
When EPCs and facility operators issue bids, they require equipment they can trust in highly variable conditions. Standard catalog pumps often fail when subjected to the severe thermal shock of cryogenic LNG, the corrosive nature of H2S removal loops, or the vibrations of mobile skid deployment. Our client needed a single, direct-coupled horizontal pump platform that could be configured to survive all of these extremes without causing project delays.
The commercial problem sits underneath the technical one. Specifying a different pump for each duty multiplies the spares inventory, the training burden and the number of vendor qualifications a procurement team has to carry. One platform that can be configured three ways is worth more to a bid than three best-in-class machines.
- Cold conduction into the bearings: on a close-coupled cryogenic pump, heat flows out of the motor and into the process, taking lubricant viscosity with it.
- Sour service chemistry: H2S removal loops attack standard wetted metallurgy and demand materials qualified to NACE practice.
- Alignment drift in the field: a spacer-coupled set has to be laser-aligned on site and re-checked after every thermal cycle and every relocation.
- Schedule risk: a pump that arrives needing site fitting work puts the commissioning date on the critical path.
The CryoZero™ Solution
The CryoZero™ ZXO-CP Series was engineered with a vented thermal break spool and direct-coupled motor to eliminate field alignment issues and protect bearings from cold conduction. This core design proved highly adaptable:
Why one platform covered three duties
- Vented thermal break spool: the open lantern section between volute and motor breaks the conduction path and lets any cold vapour escape to atmosphere rather than tracking into the bearing housing.
- Direct-coupled motor: with the rotor carried on the motor shaft there is no spacer coupling to align, so there is no alignment to lose after a thermal cycle or a relocation.
- One hydraulic end, three material specs: the same volute and impeller geometry is cast in the metallurgy each duty requires, so performance curves carry across configurations.
- Skid-ready footprint: the compact direct-coupled envelope fits a wheeled frame without a separate baseplate and alignment exercise.
One Platform, Three Builds
The same ZXO-CP hydraulic end was specified three ways. Only the materials, instrumentation and mounting changed — the pump a buyer qualifies once is the pump that goes to every site.
| Duty | Sour Gas Processing | Mobile Skid | LNG Terminal |
|---|---|---|---|
| Primary risk | H2S corrosion | Transport & vibration | Thermal shock |
| Mounting | Grouted plinth | Wheeled stainless frame | Fixed skid |
| Instrumentation | Explosion-proof | Onboard control panel | Explosion-proof |
| Thermal break spool | ✓ | ✓ | ✓ |
| Direct-coupled | ✓ | ✓ | ✓ |
| Field alignment required | None | None | None |
The Results
The thermal break spool successfully protected the motor in −162°C service.
Direct-coupled design eliminated coupling alignment maintenance.
Skid-mounted systems reduced site installation time by 60%.
ATEX/CSA certification for hazardous zones.
Figures reported across the installations described above. Results depend on duty cycle, medium and site conditions, and are not a performance guarantee.
“Cryovanta's ability to adapt the CryoZero platform to our site constraints—whether we needed a mobile skid or a pump that could survive an H2S loop and freezing snow—is why they are our preferred vendor for critical equipment.”
— EPC Procurement Director