Single-Stage Heavy-Duty Process Pump

CentraFlow™ Series – Heavy-Duty Process Pumps

Single-stage, radially split centrifugal pumps engineered for high-capacity refining, petrochemical, and thermal power applications.

CentraFlow Series heavy-duty process pump, side profile on its skid-mounted steel baseplate with the enclosed coupling guard CentraFlow process pump, three-quarter view from the suction side showing both flanges and the seal chamber CentraFlow process pump, three-quarter view from the drive end showing the motor and spacer coupling CentraFlow process pump viewed along the pump axis from above the suction flange Close-up of the CentraFlow seal chamber, bearing housing, monitoring ports and oil sight glass
Flow Rate
13 – 11,450 GPM3 – 2,600 m³/h
Max Head
Up to 820 ft250 m
Temperature
−4°F to +842°F−20°C to +450°C
Speed
1450 / 2950RPM
Overview

Overview

The CentraFlow™ Series is a heavy-duty, horizontal single-stage process pump built for continuous-duty applications in the refining, petrochemical, and thermal power industries.

The CentraFlow utilizes a rigid skid-mounted baseplate and a heavy-duty bearing housing to isolate vibration and extend mechanical seal life. It features a radially split, centerline-mounted casing and a single-suction impeller design to deliver exceptional flow rates while minimizing axial thrust.

Where It Runs

Main Applications

01

Refining & Petrochemical

Transfer of high-temperature process fluids.

02

Cryogenic Engineering & Coal Processing

Extreme temperature handling.

03

Thermal Power Generation

Boiler feed and cooling water circulation.

04

Heavy Industrial

Paper, pulp, sugar, and water supply.

Built Into the Machine

Engineering Features

01

Rigid Skid-Mounted Baseplate

Fabricated from heavy-gauge structural steel with built-in drain rims. Ensures perfect pump-to-motor alignment.

02

Heavy-Duty Bearing Housing

Oversized radial and thrust bearings with oil-ring lubrication. Equipped with condition monitoring ports.

03

Cartridge Mechanical Seal

Dual pressurized cartridge seal allows for quick replacement without disassembling the pump.

04

Back Pull-Out Design

The complete rotating assembly can be removed for maintenance while the casing and piping remain in place.

05

OSHA-Compliant Coupling Guard

High-torque spacer coupling compensates for thermal expansion, fully enclosed by a heavy-duty safety guard.

Selection

Available Models

ModelMax FlowMax HeadMotor PowerFlange Size
CF-150350 GPM (80 m³/h)300 ft (90 m)50 HP (37 kW)3″ / 2″
CF-300800 GPM (180 m³/h)500 ft (150 m)150 HP (110 kW)6″ / 4″
CF-5001,500 GPM (340 m³/h)750 ft (230 m)300 HP (220 kW)8″ / 6″

Note: Contact engineering for custom flow rates up to 11,450 GPM.

Data

Technical Specifications

ParameterValue
Design StandardAPI 610 / ISO 13709 / ASME B73.1 principles
Pump TypeSingle-Stage, Radially Split, Centerline-Mounted
Flow Rate13 – 11,450 GPM (3 – 2,600 m³/h)
Head Range13 – 820 ft (4 – 250 m)
Medium Temperature−4°F to +842°F (−20°C to +450°C)
Flange RatingASME B16.5 Class 300 RF
Speed1450 / 2950 RPM or VFD Range
ComplianceATEX / CSA / UL / CRN available upon request.
Testing & Documentation

Quality & Compliance

Every CentraFlow unit undergoes rigorous hydrostatic and performance testing before shipment.

Next Step

Ready to specify the CentraFlow™ for your facility?

Our engineering team can customize the impeller trim, motor voltage, and material specs to match your exact site requirements.