Horizontal Multi-Stage Barrel Pump

CryoForce™ HD-Series – Horizontal Multi-Stage Barrel Pumps

Horizontal, double-casing multi-stage barrel pump engineered for extreme high-pressure cryogenic transfer and pipeline boosting.

Features a fully withdrawable inner cartridge and axial self-balancing design for unmatched reliability and extended bearing life up to 11,150 ft (3,400 m) head.

CryoForce HD-Series horizontal multi-stage barrel pump on its fabricated steel baseplate
Max Flow
3,500 GPM800 m³/h
Max Head
11,150 ft3,400 m
Max Pressure
5,000+ PSIcasing dependent
Speed
2950 / 3600RPM
Overview

Overview

The Cryovanta™ CryoForce™ HD-Series is a heavy-duty, horizontal multi-stage centrifugal pump built around a robust double-casing (barrel) architecture.

Designed to withstand the most demanding high-pressure cryogenic applications, the outer pressure-containing casing is manufactured using a high-strength forging process, ensuring absolute safety and reliability at extreme temperatures. Inside, the advanced hydraulic components are designed using PUMPCAD and CFD 3D fluid simulation, delivering high efficiency and exceptional cavitation performance.

The HD-Series is built for longevity. It features inherent axial self-balancing capabilities; by utilizing opposed impeller arrangements, the bearings are not subjected to axial loads under normal operating conditions. This significantly extends service life and reduces maintenance downtime.

A multi-stage barrel pump package assembled on its skid in the Cryovanta workshop
Inside the Machine

Advanced Structural Design & API 610 Components

The HD-Series separates pressure containment from hydraulics. The forged outer barrel casing is the only component holding system pressure, while every rotating and stationary hydraulic part is carried on a single withdrawable inner cartridge.

That split is what allows the complete rotor — impellers, diffusers, stage casings, wear rings and tie rods — to be drawn out of the barrel as one assembly for inspection, with the suction and discharge flanges left bolted to the process piping.

  • 1Non-Drive End Bearing Assembly
  • 2Outboard Bearing Housing
  • 3Discharge Seal Assembly
  • 5Outer Barrel Casing
  • 6Diffuser
  • 8Balance Line Assembly
  • 10Intermediate Stage Casing
  • 11Impeller
  • 12Casing Wear Ring
  • 13Casing Tie Rod
  • 14Suction Stage Casing
  • 15Bearing
  • 16Drive End Bearing Assembly
  • 17Flexible Coupling
Cross-section of the CryoForce HD-Series barrel pump with numbered component callouts
Longitudinal cross-section — opposed impeller arrangement and withdrawable inner cartridge.
Where It Runs

Key Applications

01

High-Pressure LNG Transfer

Main export terminals and large-scale send-out.

02

Pipeline Boosting

Long-distance cryogenic fluid transport.

03

Regasification Plants

High-pressure send-out pumps.

04

Industrial Gas Injection

High-head process feed.

Built Into the Machine

Engineering Features

  • Double-Casing (Barrel) Design: The forged outer casing contains the pressure, while the inner cartridge handles the hydraulics.
  • Fully Withdrawable Cartridge: Allows for complete inspection and maintenance of the rotor assembly without disturbing the suction or discharge piping.
  • Axial Self-Balancing: Opposed impeller design eliminates axial thrust on the bearings, drastically extending bearing life.
  • CFD-Optimized Hydraulics: Precision-engineered impellers and diffusers ensure high efficiency and low NPSH requirements.
  • Heavy-Duty Baseplate: Fabricated steel skid with a diamond-plate deck for structural rigidity and easy access.
Hydraulic Coverage

Performance Curves

Published envelopes for both operating speeds. Final selection is made against your duty point.

Performance envelope at 2950 RPM, total developed head against flow rate
2950 RPM Performance
Performance envelope at 3600 RPM, API 610 compliant, total developed head against flow rate
3600 RPM Performance — API 610 Compliant
Range

Available Models

Model TierFlow RangeHead RangeStagesTypical Application
CF-HD/StandardUp to 1,500 GPM (340 m³/h)Up to 3,000 ft (915 m)4–8Standard high-pressure transfer
CF-HD/High-HeadUp to 2,000 GPM (450 m³/h)Up to 7,500 ft (2,300 m)9–12Pipeline boosting & injection
CF-HD/Max-PressureUp to 3,500 GPM (800 m³/h)Up to 11,150 ft (3,400 m)10–12Extreme pressure regasification
Data

Technical Specifications

ParameterValue
Pump TypeHorizontal, multi-stage, double-casing (barrel)
Design StandardEngineered to API 610 (BB5) principles
Max Flow RateUp to 3,500 GPM (800 m³/h)
Max Differential HeadUp to 11,150 ft (3,400 m)
Max Operating PressureUp to 5,000+ PSI (dependent on casing rating)
Operating Speed2950 RPM / 3600 RPM
Casing MaterialForged carbon steel or stainless steel
Inner CartridgeFully withdrawable, SS316 / cryogenic alloys
Rotor BalanceAxial self-balancing (opposed impellers)
BearingsHeavy-duty, low axial load design
LubricationForced oil or ring oil (project specific)
Footprint

Dimensions & Weight

ParameterValue
Overall Length180 in (4,572 mm)
Overall Width84 in (2,133 mm)
Overall Height72 in (1,828 mm)
Approximate Weight18,500 lbs (8,391 kg)
Baseplate TypeFabricated steel skid

Figures are typical for a maximum-frame unit. Final dimensions and weight depend on the specific motor and gearbox selection, baseplate configuration and any site-specific ancillaries.

The Case For It

Why Choose the CryoForce™ HD-Series?

  • Zero Piping Disruption: The barrel design allows you to pull the entire internal rotating assembly out for maintenance without touching the main suction and discharge flanges.
  • Extended Bearing Life: The axial self-balancing design means the bearings do not have to fight the pump's own pressure, reducing wear and tear.
  • Forged Durability: The forged outer barrel provides superior resistance to high pressure and thermal shock compared to cast casings.
  • CFD Precision: Advanced 3D flow modeling ensures stable operation across the entire performance curve.

Need a custom hydraulic trim for your specific flow and head requirements? Contact our engineering team.

Global Supply

Certifications & Compliance

The HD-Series is supplied against North American, European and international approvals, with explosionproof motor options for classified areas.

North America

CSA C/USUL ListedCRN Registered

Europe & Global

CE MarkedPED 2014/68/EU

Hazardous Areas

ATEXIECExZone 1 & 2

Quality

ISO 9001:2015

Explosionproof motor options are available for ATEX / IECEx Zone 1 and Zone 2 service. Certification scope is confirmed per project at order stage.

Next Step

Ready to specify the HD-Series for your facility?

Send us the medium, flow and site conditions and a Cryovanta engineer will come back to you directly.